This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 1 voto(s) - 5 Media
  • 1
  • 2
  • 3
  • 4
  • 5
prusa i3 mk3s clon no arranca
#1
Hola , tengo un clon de prusa que no arranca y sale un error cuando termina de flashear . (flasheo fallido. por favor comprueba el log de avrdude).
si alguien me puede echar una mano.
Tengo windows 10 y conecta y por lo que parece flahsea pero luego pone que no puede conectar con el com3.
Gracias de antemano.
  Responder
#2
Hola, para poder responderte con propiedad, tendrás que dar más información: de qué placa se trata, con qué software estás realizando la carga del firmware y poner un pantallazo de los mensajes de error que te está dando.
  Responder
#3
Ahora estoy fuera pero lo hantes posible os dire,
cargar el firmware con prusaeslaicer y la placa la rambo 1.1b o algo asi .
mañana pongo el pantallazo
  Responder
#4
Hola , esto es lo que me sale:

[Imagen: IMG-3481.jpg]

[Imagen: IMG-3482.jpg]


avrdude-slic3r -v -p atmega2560 -c wiring -P COM12 -b 115200 -D -U flash:w:0:C:\Users\dioni\Desktop\PRUSA\prusa3d_fw_MK3S_3_9_0_3421.hex:i

avrdude-slic3r: Version 6.3-20160220-prusa3d, compiled on Mar 21 2020 at 12:45:57
                Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/
                Copyright © 2007-2014 Joerg Wunsch


                Using Port                    : COM12
                Using Programmer              : wiring
                Overriding Baud Rate          : 115200
                AVR Part                      : ATmega2560
                Chip Erase delay              : 9000 us
                PAGEL                         : PD7
                BS2                           : PA0
                RESET disposition             : dedicated
                RETRY pulse                   : SCK
                serial program mode           : yes
                parallel program mode         : yes
                Timeout                       : 200
                StabDelay                     : 100
                CmdexeDelay                   : 25
                SyncLoops                     : 32
                ByteDelay                     : 0
                PollIndex                     : 3
                PollValue                     : 0x53
                Memory Detail                 :

                                         Block Poll               Page                       Polled
                  Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
                  ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
                  eeprom        65    10     8    0 no       4096    8      0  9000  9000 0x00 0x00
                  flash         65    10   256    0 yes    262144  256   1024  4500  4500 0x00 0x00
                  lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                  hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                  efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                  lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
                  calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
                  signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

                Programmer Type : Wiring
                Description     : Wiring
                Programmer Model: AVRISP
                Hardware Version: 15
                Firmware Version Master : 2.10
                Vtarget         : 0.0 V
                SCK period      : 0.1 us

avrdude-slic3r: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude-slic3r: Device signature = 0x1e9801 (probably m2560)
avrdude-slic3r: safemode: hfuse reads as D8
avrdude-slic3r: safemode: efuse reads as FD
avrdude-slic3r: reading input file "C:\Users\dioni\Desktop\PRUSA\prusa3d_fw_MK3S_3_9_0_3421.hex"
avrdude-slic3r: writing flash (248818 bytes):

Writing | ###################avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x13
avrdude-slic3r: stk500v2_paged_write: write command failed
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x14
avrdude-slic3r: stk500v2_paged_load: read command failed
 ***failed;  
############################### | 100% 70.78s

avrdude-slic3r: failed to write flash memory, rc=-1

avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x18
avrdude-slic3r: stk500isp_read_byte(): timeout/error communicating with programmer
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x18
avrdude-slic3r: stk500isp_read_byte(): timeout/error communicating with programmer
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x18
avrdude-slic3r: stk500isp_read_byte(): timeout/error communicating with programmer
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x18
avrdude-slic3r: stk500isp_read_byte(): timeout/error communicating with programmer
avrdude-slic3r: safemode: Sorry, reading back fuses was unreliable. I have given up and exited programming mode
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_recv(): timeout
avrdude-slic3r: stk500v2_getsync(): timeout communicating with programmer
avrdude-slic3r: stk500v2_command(): failed miserably to execute command 0x11
avrdude-slic3r: stk500v2_disable(): failed to leave programming mode

avrdude-slic3r done.  Thank you.
  Responder
#5
Hola buenos dias, ya he solucionado este tema. tenia los conectores del lcd intercambiados los quite para grabar el programa y dewspues montarlos bien y a funcionar
gracias.

ahora tengo otro problema por si alguien conoce las prusas, me sale un error al intentar calibrar: (error prusa problema encontrado nivelacion z forzosa )
y no se que es si puede ser por el pinda que este defectuoso o que pasa
gracias
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  CONSULTA Mk3S no calibra bien la primera capa br0nka2 2 1,086 01-07-2020, 10:16 AM
Último mensaje: br0nka2
  DUDA Qué tipo de chapa de acero de resorte elegir para comprar una Prusa I3 MK3S alvmarvil 1 1,151 16-12-2019, 05:54 PM
Último mensaje: PacoMB
  problema con extrusor titan clon irondl 1 1,289 05-08-2018, 08:27 PM
Último mensaje: Simemart
  CONSULTA Cuando arranca la impresion sube el eje z lucas_slam 4 4,725 18-02-2018, 07:52 PM
Último mensaje: pabli4ever