This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 voto(s) - 0 Media
  • 1
  • 2
  • 3
  • 4
  • 5
CONSULTA Retracciones para material EP de Smart material
#1
Buenas

Si alguno de ustedes tiene experiencia con el Material EP de smart material, me gustaría que me aconsejara como ha calibrado las retracciones.

Se como funciona el manejo de las retracciones y hasta ahora me he ido manejando bien con el PLA y el PLA reciclado, pero es que llevo 15 pruebas con este material con distintos parámetros y no hay manera de que salgan sin hilos.

Utilizo una ender 3 s1 pro (extrusion directa), a la que recientemente le he cambiado la boquilla por una nueva. Normalmente utilizo unas retracciones de 0.8 - 40.

Ah, lo primero que hice fue realizar una torre de temperatura y según dicha torre la temperatura ideal es de entre 190º-200º.

Estos son los parámetros que he usado hasta ahora
[Imagen: Whats-App-Image-2022-12-25-at-11-05-07-PM.jpg]

Agradecería cualquier ayuda para resolver esto, ya que estoy intentando hacer proyectos estudiantiles con este material.

Es la primera vez que escribo en un foro y no los entiendo bien, así que si hay algún error me disculpan.




Un saludo y gracias.
  Responder


Posibles temas similares…
Tema Autor Respuestas Vistas Último mensaje
  Problemas de retracciones??? ofitecno 1 0 10-10-2023, 02:30 PM
Último mensaje: Simemart
  CONSULTA PROBLEMAS DE IMPRESION CR 10 SMART PRO ESTEBANGO07 1 23 08-04-2023, 06:16 PM
Último mensaje: Simemart
Video CONSULTA Problema con extrusor en cr-10 smart fnocean 5 144 23-03-2023, 06:21 PM
Último mensaje: Simemart
  Problema Retracciones Ender 6 oterino93 9 1,226 19-09-2021, 11:20 AM
Último mensaje: Simemart
  el mejor material para imprimir una estatuilla? josssss 1 756 26-04-2021, 11:47 PM
Último mensaje: neoxM3